Brick pavers being cleaned

The BEST Methods to clean your pavers before sealing

If you have a pool, you know the importance of keeping your pavers clean. It makes your pool look nicer, but it also helps to protect the pavers from staining and damage. This blog post will discuss the best methods for cleaning your pavers before sealing them. We will also provide tips on how to seal your pavers properly to last for many years!

How Should Pavers Be Cleaned Before Sealing?

Cleaning pavers before sealing requires multiple processes to ensure that all debris is removed from the surface. In most cases, the method you use is determined by the type of filth you wish to remove.

For example, most leftover dust can be removed by simply sweeping the surface with a brush. This procedure, however, will not work if you wish to eliminate weeds, moss, or mold, for example.

Here are the BEST Methods how you can Clean Pavers Before Sealing

  1. Make some room. Eliminate any furniture, plant pots, or other items that have been placed on top of the pavers.
  2. Clean up any vegetation. Remove any weeds that have grown between both the paver joints. Remove any undesired moss or lichen from the paver surface or between the joints with a non-wire stiff-bristle brush.
  3. Wet the paving stones. Grab a yard hose or a large pail of water and soak the pavers with water before adding any cleaning solution.
  4. Make a cleaning solution that is gentle and non-acidic. To clean your concrete pavers, we recommend using one of these fantastic Prosoco products from EAP. Still, if you’re in a hurry, you can make your own gentle, non-acidic concrete cleaning solution with a few everyday home items.

If you want to do it yourself, you must fill a large bucket halfway with warm water and a mild dish detergent. Stir the solution thoroughly before spreading it evenly over the pavers. 

  1. Scrub the pavers gently. Use a thorny scrub brush or a push broom to clean the pavers. A wire-bristle brushing or scouring pad should not be used since they can scrape the pavers and ruin any sealants that have been placed.
  2. Rinse the pavers thoroughly. Spray the area with a garden hose with a spray attachment to eliminate any filth pushed up by the scrub brush. When cleaning with the hose nozzle, be careful not to dig up joint sand. Using a pressure washer can destroy the seal on the paver.

Here are some tips on how to seal your pavers:

  1. Use a high-quality sealer: This will ensure that your pavers are protected from the elements.
  2. Apply the sealer evenly: Make sure to apply the sealer evenly so that all pavers are protected.
  3. Let the sealer dry completely: Once you have applied it, let it dry completely before using your pool or patio.

By following these tips, you can clean and seal your pavers to last for many years! Thanks for reading! Pool paver cleaning and sealing, pool paver sealer, how to clean pavers before sealing, and how to seal pavers.

If you have any questions, feel free to contact us today! We would be happy to help you with your pool and patio needs. Thanks again for reading!

Leave a Reply

Your email address will not be published. Required fields are marked *